Caring for the wiper device not only on the part of the rubber, although the rubber wiper become the primary function. But some parts also need to be treated and checked carefully. Care wiper device should not be concentrated on the rubber, some parts such as wiper frame and the driving motor must also be considered. If the frame and the driving motor is not treated it will interfere with the driver during the rainy season because the wipers do not work.
Here are some tips on doing a thorough wiper care:
1. Frequent movement of the wiper droop if rarely do care, it can be seen from the holder wipernya or check bolt handlebar position wiper possibility in a state of slack.
2. If the wiper die not move or only one that works, check cable connections there may be loose or dirty. In this condition usually switch the wipers will feel the heat.
3. Do also some checks such as fuse or fuse is loose or not, immediately tighten if loose. If you need to check the connection or the handlebars wiper inside the handlebars regardless whether or not, in order to immediately fix the wiper normal again.
I hope this article is helpful for you
The term was in common use clutch smell. The smell comes from the burning canvas clutch. Cases like this are often experienced by the car driver through the streets uphill. Beginning of this problem arises because of the bad habits driver who constantly stepping on the clutch on the manual transmission car.
Because the clutch is worn excessively, if it continues to be forced road even later can be more severe. Inevitably fly wheel must be replaced because it was rubbing against the metal plate clutch. When the clutch is already odors, he added, the better the driver stop the pace car for the safety of the trip.
If you must pass through the uphill road, the driver not to use half clutch. Half couplings were used just only from the stop to the street. When the car stopped on a hill is better to use the handbrake or for drivers who are proficient can use the foot brake. But should the hand brake so that the car does not retreat.
I hope this article is helpful for you
Toyota Motor is developing technology driver assistance system that is integrated with artificial intelligence (AI). Development of this technology is targeted to be completed in five years. The usefulness of AI technology can improve vehicle safety by anticipating road accidents. AI will be very useful applied to a car without a driver or an autonomous vehicle.
To develop this advanced technology, Toyota will disburse $ 1 billion in five years. Most of the technology will be used as a vehicle security features. It is a short-term priority.This technology allows the vehicle to think, act, and even take over control of the steering wheel from the driver to maneuver required to avoid a collision. This step is an aggressive effort from Toyota to realize autonomous car in the event the 2020 Olympics in Tokyo.
Technology driver assistance system when it’s already widely used by utilizing image sensors to avoid collisions with other vehicles including a pedestrian who was in one lane. However, the technology developed TRI claimed to be able to make the car more responsive in maneuvering. Intelligence is able to dodge a car suddenly. Basically it’s like a guardian angel who is able to compress the gas, steer, brake, in parallel with the driver.
Out of the mainstream, Toyota apparently is developing a flying car. It is known from the patent publications image ‘Shape Morphing Fuselage For an Aerocar’ proposed Toyota Motor Engineering and Manufacturing North America. Patents issued by the authorities of the United States is known on June 23, 2016. The filing of this patent itself has been carried out since December 19, 2014.
In these patents appear Toyota equipped car body panels that can be arranged flexibly. This is to facilitate when walking on land. Thin body panels that serves to hide the wings in it. In conditions of oncoming cars on the ground, the wings are hidden inside the body, and vice versa.
If not used to fly, wings tucked in a folded position that does not require a large space. Position is in the rear cabin of the car. In the picture also appears a small propeller at the rear of the car. The car’s design was also made tangible sedan like a plane with its front end like an ellipse.
No mention of whether the image of this application will be imposed on the Toyota model of what and when it will be realized. However, from this picture it is clear that Toyota is already square off developing a new transport technology that can function on land and air.